Version 0.1.75+
Result properties are used to define additional information about result variables.
These information are saved in CLC file and used by SCIA Engineer to adapt numerical and graphical output of the calculation.
Definition:
Result properties are defined in Design Forms Builder - Header editor.
In bottom part of the window, you see table of all numeric result variables (numeric variables with ESA_ID starting with "Result.").
Result properties:
- ESA_ID - readonly ESA_ID, must start with "Result."
- Variable name - readonly variable name
- Result group - One of predefined result groups. Result groups are defined in the text box above the table
- ESA unit - defines physical type of the variable. This property is used to select appropriate unit, draw style etc. in SEN.
- Norm reference - reference to norm paragraph which defines this result. Can be used in calculation documentation, help, output, ...
- Extreme - defines what is assumed to be an Extreme - Minimum/Maximum/Both
- Hide zero values - set to TRUE if SCIA Engineer should hide table column which contains just zeros. Otherwise FALSE.
- Reverse axis - set to TRUE, if the value should be drawn in reverse direction in the SEN graphical output.
- Draw direction - defines direction, in which the result will be drawn in SEN graphical output.
- Draw limit - minimum - Color of the line in SEN graphical output will be gray, if the value is lower than this limit
- Draw limit - maximum - Color of the line in SEN graphical output will be red, if the value is greater than this limit
- Units - unit of the variable
See attached example for more info:
- ResultProperties.jpg (219.09 KiB) Viewed 4175 times