Design Forms

New concrete section library is available
Version 5.0 and higher

New concrete section library allows user to use various cross section shapes, reinforcement templates and stirrup shapes.

IO values provided by CSL:
list
*CS.Component.Shape.Point - array of outline points = cross section shape/*:m
*Beam.Reinforcement.Bar - array of bars of longitudinal reinforcement/*:m
*Beam.Reinforcement.c_min - minimal cover of longitudinal reinforcement/*:m
*Beam.Reinforcement.c_max - maximal cover of longitudinal reinforcement/*:m
*CS.Geometry - cross section shape dependant set of values (dimensions)/*:m
*Beam.Reinforcement.StirrupChars - stirrups characteristics/*:m/list:u

Stirrup characteristics:
list
*Beam.Reinforcement.StirrupChars.Asw - area of all stirrups in one layer/*:m

*Beam.Reinforcement.StirrupChars.ss - average distance between layers/*:m
*Beam.Reinforcement.StirrupChars.Asw_ss - average area of stirrups per meter m2/m/*:m
*Beam.Reinforcement.StirrupChars.D - average diameter of stirrup bar/*:m
*Beam.Reinforcement.StirrupChars.Ns - number of stirrup bars in one layer/*:m
*Beam.Reinforcement.StirrupChars.Angle - average angle of stirrups (0°= horizontal, 90°= vertical)/*:m
*Beam.Reinforcement.StirrupChars.Branch - array of arrays of points defining stirrup branches. Example: Beam.Reinforcement.StirrupChars.Branch0 contains array of points which defines shape of first stirrup./*:m/list:u

size=150Concrete section library improvements/size
Version 5.2.38 and higher

Concrete section library was extended with following properties/features:
list
*ReinfTabsVisible - set to false to hide Reinforcement and Stirrup tabs.
Can be set runtime, within UpdateDialog() function./*:m
*BGImage - url=http://designforms.net/forum/viewtopic.php?f=16&t=86&p=94&hilit=BGImage#p94support background image/url/*:m
*SelectedTabColor - Color of active tab/*:m
*TabBGColor - Background color of non-active tabs/*:m/list:u