IO.REINF
Posted: 16 Jul 2014, 06:30
size=150bIO.REINF/b/size
Version: 5.1.19 and higher
0.1.45 and higher
IO.REINF is shortcut which contains data from
Beam.Reinforcement
Section.Reinforcement
ubExample:/b/u
Longitudinal bars are typically saved to Beam.Reinforcement.Bar.
But for haunch beam, longitudinal bars MUST be saved to Section.Reinforcement.Bar, because position of each bar differs in each section.
IO.REINF handles this and provide all the data on one place.
SDF developer doesn't have to check anything, just use IO.REINF.Bar.
Version: 5.1.19 and higher
0.1.45 and higher
IO.REINF is shortcut which contains data from
Beam.Reinforcement
Section.Reinforcement
ubExample:/b/u
Longitudinal bars are typically saved to Beam.Reinforcement.Bar.
But for haunch beam, longitudinal bars MUST be saved to Section.Reinforcement.Bar, because position of each bar differs in each section.
IO.REINF handles this and provide all the data on one place.
SDF developer doesn't have to check anything, just use IO.REINF.Bar.