Generating all dangerous combinations from Result class
Posted: 09 Sep 2015, 08:05
bHow to generate separately all dangerous combinations for all envelope combinations in Result Class./b
When calculation have to be performed for ULS and SLS combination together, this setting is necessary.
It allows to generage extremes from all envelope combinations which are used in Result Class.
attachment=3
Select requested calculation in Check manager and tick "Generate dangerous combinations separately for each item in the class" checkbox. Checkbox is not tick by default.
attachment=4
Run prepared calculation.
attachment=1
attachment=0
Example Esa project
attachment=2
When calculation have to be performed for ULS and SLS combination together, this setting is necessary.
It allows to generage extremes from all envelope combinations which are used in Result Class.
attachment=3
- Result class with defined ULS and SLS envelope combination
- ResultClass.PNG (7.3 KiB) Viewed 2780 times
Select requested calculation in Check manager and tick "Generate dangerous combinations separately for each item in the class" checkbox. Checkbox is not tick by default.
attachment=4
- Integrated Design Forms - Check manager - Generate dangerous combinations separately for each item in the class checkbox
- Checkbox.PNG (30.66 KiB) Viewed 2780 times
Run prepared calculation.
attachment=1
- Load.emd file generated from Scia Engineer when checkbox is ticked
- GeneratedCombiChecked.PNG (7.56 KiB) Viewed 2780 times
attachment=0
- Load.emd file generated from Scia Engineer when checkbox is NOT ticked
- GeneratedCombiUnchecked.PNG (4.64 KiB) Viewed 2780 times
Example Esa project
attachment=2
- Combi_test.esa
- Example of beam with ULS and SLS combination
- (649.54 KiB) Downloaded 305 times